Hydraulic Press Machine

Sun, 08 Nov 2020 03:15:18 +0000

Single column hydraulic press

Computer optimized vertical C-shaped structure design, good rigidity;

The fuselage is welded by steel plates, and the whole is tempered after welding to ensure the stability of the fuselage;

All parts of the machine are installed in the machine body, and the appearance is neat and beautiful;

The hydraulic system adopts manual reversing valve, which is convenient for speed adjustment;

It has two operation modes: manual and pedal; the slider is guided by a guide post, which has strong anti-eccentric load ability;

With independent hydraulic and electrical control systems, it adopts button centralized control, which can realize two molding processes of fixed stroke and fixed pressure.

The stroke and pressure of the machine can be adjusted within the specified range.

Technical Parameters			unit	AW41-10C	AW41-25C	AW41-40C	AW41-63C	AW41-63	AW41-100C	AW41-160	AW41-200	AW41-315	AW41-400	AW41-500
Nominal force			KN	100	250	400	630	630	1000	1600	2000	3150	4000	5000
Opening height	Correction		mm	——	——	600	550	——	600	700	——	——	——	——
	Press fit		mm	630	630	770	800	800	900	1000	1200	1200	1200	1500
Slider stroke			mm	400	500	500	500	500	500	500	710	800	800	900
Deep Throat			mm	250	290	3		450	325	350	360	380	450	800
Blanking hole size (diameter)			mm	140	180	200	200	200	200	——	——	——	——	200
Slider speed	Down		mm/s	80	50	40	50	50	34	27	90	100	100	100
	Return trip		mm/s	160	110	80	100	100	75	70	60	65	65	70
Working bench size	Left/right	Correction	mm	——	——	1000	1600	——	2000	2000	——	——	——	——
		Press fit	mm	410	510	600	630	650	700	750	1400	1800	1800	2000
	Front/rear		mm	420	570	550	600	600	600	600	800	1200	1300	1400
Working bench height	Correction		mm	——	——	770	850	——	1000	1000	——	——	——	——
	Press fit		mm	710	710	600	600	730	700	700/630	900	1200	1400	1400
Main motor power			KW	2.2	4	5.5	7.5	7.5	7.5	11	15	22	22	37

Four column hydraulic press

Three-beam and four-column structure, optimized by computer, simple, economical and applicable;

The hydraulic control system adopts a cartridge valve integrated system, which has reliable action, long service life, small hydraulic shock, and reduces connecting pipelines and leakage points.

Independent electrical control system, reliable work, intuitive action, convenient maintenance;

It adopts button centralized control, with adjustment (inching) and single (semi-automatic) operation modes.

It can realize the two molding processes of fixed stroke and fixed pressure, and has the properties of pressure holding time delay.

The working pressure and stroke can be adjusted within the specified range according to the technological requirements;

This series of presses are suitable for deep drawing, bending, flanging, cold extrusion, blanking and other processes of metal materials. It is also suitable for correction, pressing, powder products, abrasive products, press molding, plastic products, and press molding of insulating materials.

Technical Parameters		unit	AW32-315	AW32-400	AW32-500A	AW32-500B	AW32-500C	AW32-630A	AW32-630B	AW32-800	AW32-1000	AW32-1250	AW32-1600
Nominal force		KN	3150	4000	5000	5000	5000	6300	6300	8000	10000	12500	16000
Ejection force		KN	630	630	900	1000	1000	2000	2500	3000	3500	400	630
Working pressure		Mpa	25	25	25	25	25	25	25	25	25	25	25
Slider stroke		mm	800	800	900	900	900	1100	1100	1400	1400	1400	1500
Ejection stroke		mm	300	300	350	300	350	300	350	350	400	400	400
Opening height		mm	1250	1250	1300	1300	1300	1500	1500	1800	2000	2200	2200
Slider speed	Hurry down	mm/s	100	100	220	100	100	220	220	220	220	220	200
	normal	mm/s	8-20	8-12	11-16	10-15	10-15	6-15	6-20	12-15	10-20	8-20	8-20
	Return trip	mm/s	60	55	120	70	70	120	120	120	120	100	100
Working bench size		mm	1260	2000	2200	1600	2800	2200	2800	2200	2500	2500	2800
		mm	1200	1500	1500	1400	1800	1500	1800	1500	1600	1600	1600
Main motor power		KN	22	22	44	44	44	60	60	90	110	110	165

Single-action sheet drawing hydraulic press

This series of hydraulic presses are mainly used in industries such as automobiles, tractors, rolling stock, ships, motors, and meters, as well as the stretching, bending, blanking, extrusion, and forming processes of sheet metal in the power industry and aviation industry.
It is also suitable for drawing work of various high-strength alloy sheets.
This series of machine tools can be equipped with a mobile worktable and controlled by PLC.

Technical Parameters		unit	AW27-200	AW27-315	AW27-400	AW27-400A	AW27-500	AW27-630	AW27-630A	AW27-800	AW27-800A	AW27-800B	AW27-1000
Nominal force		KN	2000	3150	4000	4000	5000	6300	6300	8000	8000	8000	10000
Hydraulic cushion force		KN	630	1000	1500	1500	1500	2000	2000	2000	2500	2000	3500
Slider stroke		mm	800	1000	1000	1200	1000	1500	1200	1500	850	1200	1600
Hydraulic cushion stroke		mm	250	250	350	350	300	400	350	400	300	300	400
Working pressure of liquid		Mpa	25	25	25	25	25	25	25	25	25	25	25
Opening height		mm	1200	1500	1500	1800	1400	2000	1800	2200	1450	1700	2000
Bench Moving distance		mm	——	——	2000	2400	1600	2700	2400	2700	2200	1800	2700
Slider size	left/right	mm	1000	2500	2700	3000	3000	4500	3000	4500	3200	2500	3800
	front/rear	mm	1000	1600	1500	2000	2000	2500	2000	2500	2000	1600	2500
working desk size	left/right	mm	1000	2500	2700	3000	3000	4500	3000	4500	3200	2500	3800
	front/rear	mm	1000	1600	1500	2000	2000	2500	2000	2500	2000	1600	2500
Slider speed	Hurry down	mm/s	220	200	200	250	220	200	220	200	220	220	250
	normal	mm/s	6`15	8`15	6`15	10`25	8`20	6`20	10`25	6`19	10`25	10`25	8`20
	Return trip	mm/s	160	150	150	150	160	150	120	140	220	120	120
Hydraulic cushion speed	Eject	mm/s	60	60	60	60	80	80	80	60	60	60	60
	return	mm/s	100	100	100	80	120	100	100	80	80	100	100
Main motor power		KW	15	22	30	44	60	74	90	90	110	110	110

Technical Parameters		unit	AW27-1000A	AW27-1000B	AW27-1250	AW27-1250A	AW27-1600	AW27-1600A	AW27-2000	AW27-2000A	AW27-2500	AW27-3000	AW27-5000
Nominal force		KN	10000	10000	12500	12500	16000	16000	20000	20000	25000	30000	50000
Hydraulic cushion force		KN	3500	4000	3500	4000	6000	4000	6000	5000	6000	8000	10000
Slider stroke		mm	1500	1200	1500	1200	1500	1200	1500	1200	1600	1600	1500
Hydraulic cushion stroke		mm	400	400	350	300	350	300	350	300	400	300	400
Working pressure of liquid		Mpa	25	25	25	25	25	25	25	25	25	25	25
Opening height		mm	2300	1800	2200	1800	2200	1800	2200	1800	2300	2500	2300
Bench Moving distance		mm	2700	2200	2700	2200	2700	2200	2700	2200	2700	2700	14000
Slider size	left/right	mm	4500	3000	4500	3000	4500	3000	4500	3000	4500	4500	13000
	front/rear	mm	2500	2000	2500	2000	2500	2000	2500	2000	2500	2500	1800
working desk size	left/right	mm	4500	3000	4500	3000	4500	3000	4500	3000	4500	4500	13000
	front/rear	mm	2500	2000	2500	2000	2500	2000	2500	2000	2500	2500	1800
Slider speed	Hurry down	mm/s	200	180	180	180	200	200	200	220	200	180	160
	normal	mm/s	8`22	12`30	10`25	10`25	7.5`19	7.5-19	6`15	6`15	7`15	8`17	4`10
	Return trip	mm/s	120	120	120	120	110	110	110	120	100	100	80
Hydraulic cushion speed	Eject	mm/s	60	60	60	60	80	80	60	80	60	60	40
	return	mm/s	100	80	80	80	110	100	80	100	80	80	60
Main motor power		KW	110	135	135	135	165	165	165	165	220	275	275

Double-action sheet drawing hydraulic press

Technical Parameters		unit	AW28-80/	AW28-100/	AW28-150/	AW28-100/	AW28-200/	AW28-250/	AW28-200/	AW28-400/	AW28-500/	AW28-630/	AW28-800/	AW28-1200/	AW28-1600/
			120	180	200	350	315	400	500	630	800	1030	1300	2000	2400
Nominal force		KN	1200	1800	2000	3500	3150	4000	5000	6300	8000	10300	13000	20000	24000
Stretching force		KN	800	1000	1500	1000	—	2500	—	4000	5000	6300	8000	12000	16000
Blank holder force		KN	—	800	500	2500	1000	1500	2000	2300	3000	4000	5000	8000	8000
Hydraulic cushion force / ejection force		KN	400	315	—	630	630	1000	1000	1000	1600	2500	2500	5000	5000
Breaking power		KN	50	315	—	—	—	—	—	—	—	500	—	200	—
Stretching slider stroke		mm	410	710	570	750	800	800	900	1100	1300	1300	1400/1300	1500	1500
Stroke of blank holder slide		mm	—	350	—	600	350	350	500	1000	1200	1200	1400/1200	1200	1200
Hydraulic cushion stroke		mm	180	—	—	300	300	300	350	300	300	350	650/350	400	400
Stretching slider size	left/right	mm	500	630	790	1200	—	1340	1200	1600	2200	2500	2700	3800	2800
	front/rear	mm	560	630	920	1200	—	540	1400	1000	1700	1500	1600	1900	1600
Blank holder size	left/right	mm	—	380	—	1200	800	1400	450	2600	3200	3200	2500/4000	4500	3500
	front/rear	mm	—	380	—	1200	600	600	450	1800	2400	2200	2200	2500	2200
Hydraulic cushion size	left/right	mm	510	—	—	—	—	—	—	2150	2000	2400	1500/2500	3600	2365
	front/rear	mm	450	—	—	—	—	—	—	1250	1500	1420	1500/1500	1850	1450
working desk size	left/right	mm	500	630	790	1200	1200	2000	1200	2600	3200	3200	2500/4000	4500	3500
	front/rear	mm	600	630	920	1200	1200	1500	1400	1800	2400	2200	2200	2500	2200
Stretch slider opening		mm	660	1460	870	1600	1500	1500	1500	1800	1800	2200	2300/2000	2100	2200
Blanking slide opening		mm	—	—	—	—	—	—	—	1700	1800	2200	2300/2000	1800	1900
Stretching slider speed	Hurry down	mm/s	80	280	160	52	100	100	150	250	250	270	200/300	350	350
	normal	mm/s	20	4~10	14-25	5~17	10	10	10	12~30	12~25	10~30	11-20/12-30	20-40	15-33
	Return trip	mm/s	120	130/200	180	100	50/100	50/100	90	200	120	250	110/250	330	330
Blanking slide speed	Hurry down	mm/s	—	100	—	—	100	100	50	250	250	270	300	350	350
	normal	mm/s	—	50	—	—	10	10	twenty two	12-40	16-40	15-40	15-32	40	37
	Return trip	mm/s	—	—	—	—	50/100	50/100	35	200	150	250	250	330	330
Main motor power		KW	15	22	22	22	44	44	48	110	133.7	155	108/180	320	330

The post Hydraulic Press Machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

]]>

High speed Pnumatic Press Machine

Sun, 08 Nov 2020 02:46:22 +0000

Specifications

Accessories and configuration:

Edit
FITTING	STANDARD	MATCH
Flowing tubing head pressure type over-load protection	*
Manual -like slide adjuster (below 60T and 60T)	*
Electromotive type slide adjuster (above 60T)	*
Mechanical mold high display (below 60T and 60T)	*
Electromotive type mold high display (above 60T)	*
Slide and mold balancing unit	*
Revolving cam-operated switch	*
Crank angle display	*
Counter	*
Air source attachment	*
Two degrees guarantee bond the installment	*
Instruction for use	*
Service aid and toolbox	*
Electromotive type grease lubrication installment		○
Is mad the die pad installment		○
Frequency changer		○
Cuts the counter in advance		○
Prejudges the counter		○
Foot switch		○
Trades the mold installment (to lift mold fast, to clamp mold or moves to mold arm)		○
On the slide hits the material installment		○
Delivers the detector set by mistake		○
Power point.		○
Quakeproof foot		○
Electro-optic protective device		○
Feeding machine (air, machinery and NC each kind)		○
Expects the frame		○
Leveling arm		○
Manipulator		○
Mold illumination device		○

Work bench sizes:

Edit
MODEL	A	B	C	D	E	F	ØG	H	I	T DIE
AP-25	240	120	90	300	–	150	ø38.1	80	220	I
AP-35	280	140	120	360	–	160	ø38.1	100	250	I
AP-45	300	150	120	400	–	210	ø38.1	120	300	I
AP-60	320	160	150	500	220	220	ø50	160	360	II
AP-80	360	180	150	560	300	220	ø50	180	420	II
AP-110	400	200	160	650	300	220	ø50	220	470	II
AP-160	440	220	220	700	300	175	ø65	220	550	II
AP-200	480	240	280	850	420	200	ø65	300	630	II
AP-260	520	260	290	950	420	200	ø65	300	700	II

Machine Body

Heavy, one-piece welded steel frame is designed to resist

deflection, providing more accurate stampings and longer die life

CNC Control system

• Six programmable limit switches

• Four programmable die protection inputs

• LCD display screen for status and fault messages

• LED display for crank angle and spm

Pneumatic clutch & brake from Italy

• Wet clutch and brake provide long life, very low maintenance, and high performance even at high single-stroking rates.

• Use adopts dual valve from TACO, Japan, which can guarantee the safety and reliability of clutch.

Safety light curtains:

• Protective fence and the safety interlock to ensure the operation safety. have a movable single-hand pedal switch,easy to operate.

• Front Side Covers with safety switches, Back light safety guards (Category-4),Foot pedal conforming to CE regulation.

Control button station

• Machine is with both hands button and foot switch control: anti-tie down, non-repeat controls with ring guards; conforms to OSHA.

The post High speed Pnumatic Press Machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

]]>

Punch Press – Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die