Uncategorized – Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die

Three forging stations bolt making machine

admin — Mon, 02 Aug 2021 12:18:04 +0000

Application Scope of Three forging stations bolt making machine

Full automatic high speed Three forging stations bolt making machine is one kind of specialized machine with high efficiency and automation among fasteners forging machinery. Cold forging technique and automatic cold forging machines are used for producing different kinds of bolts, screws, rivets,special parts and nuts in the field of fastener industry. Because of the advantage of the Three forging stations bolt making machine itself and the superiority of cold forging technique, the Three forging stations bolt making machine also are widely used in different national economic fields for producing fasteners and non-standard parts for industry of aviation steamer, machinery, rail traffic, vehicle, motorcycle, bicycle, sewing machine, construction, furniture, light industry and daily necessities, etc.

Salient Features:

1. The air clutch brake system has been designed to actuate with low current and as “inching”, “single stroke” and “continuous running”. Except “inching”, the machine will always stop at the backward position of the main slider while operating in largest space.

2. Two sorts of transfers system for customer to choose: swing type (general equipped) and universal type (optional), equipped with pneumatic gripper, it can simplify the demand of operation, and is more stable when the machine runs at high speed.

3. Main motor is equipped with speed-adjust transducer, PLC control system, computer automatic man-machine interface system(Optional), these equipment make lots of convenience for customer to adjust the dimension of the non-standard products.

4. Feeding wheel and claw system are both drived by cylinder, the claw can stretch automatically when it goes back in order to reduce abrasion and noise. Feeding material and stop feeding material are controlled by two claws, the feeding material system is equipped with device for avoiding material draw back.

5. Perfect inspection system: short material inspecting and eliminating, inspection of the low location of oil pressure and air pressure, transfer system floating inspection system, overload, and lightload stop system to protect the lathe and dies and prolong the service life of them.

6. When the customer prepare to adjust the side cutting screw, they only need to adjust side cam’s station position, then they can achieve side cutting purpose. When the workpieces need not side cutting, customer can reset it to achieve the change from side cutting to former station.

7. High strengthened-material lathe bed, lengthened main and subsidiary slider structure and “pedrailtype” slider which is adopted domestically for the first time realize “zero space” assembling which assures the precision of the main slider movement and lengthens their service life of dies.

8. The main parts of all type machines have adopted strict casting procedure and annealing disposal to assure its steel hardness and precision.

9. Circle cutting die station assures the sheared material shouter than billet diameter which also can achieve accurate right angle cutting.

10. Auto sizing material stopper can adjust the precision of material size in the state of machine running.

11. P.K.O synchronized knock out system makes the choice of molding technics flexible.

12. Transfer finger moving and cutting cams are calculated via professional computer software to make machine stable in state of high speed forging.

13.There is imported converter available in electrical system, so it is easy to run the former with stepless variable drive PLC also is used for automatically inspecting the working mode of the former with the functions of fault alarm and fault display.

14.Touch screen and man-machine dialogue numerical control system are optional for meeting customer’s requirement, they are used for setting the length of thread pipe of rear knock out, the length of barrier and the feeding length, it is convenient for quick die change. This system has a memory capacity of 99 mnemonic modules for meeting the requirement of quick die change.

Main Technical Parameters

Three Stations High Speed Bolt Making Machine
Model	Unit	43S	63S	63L	83S	83L	83LL
Forging Station	NO.	3	3	3	3	3	3
Forging force	tons	16	35	35	60	60	65
Max.cut-off dia.	mm	4	8	8	10	10	10
Max.cut-off length	mm	66	70	120	85	135	175
Output rate	pcs/min	350	270	150	220	160	120
P. K. O. stroke	mm	12	12	20	12	15	30
K.O stroke	mm	52	52	115	65	125	165
Main motor power	Kw	11	11	11	15	22	22
Overall dims. Of cut off die	mm	φ20	φ30	φ30	φ30	φ30	φ30
Overall dims. Of punch die	mm	φ35*75L	φ40*90L	φ40*110L	φ45*100L	φ45*115L	φ45*115L
Overall dims. Of main die	mm	φ40*85L	φ50*85L	φ50*123L	φ60*95L	φ60*135L	φ60*185L
Die pitch	mm	50	60	60	70	80	80
Approx. weight	T	4	7	9	10	13	15.5
Applicable bolt size	mm	1-4	3-6	3-6	5-8	5-8	5-8
Shank length below head	mm	6-50	10-50	30-100	12-60	30-110	30-110

Model	Unit	103S	103L	133S	133L	133LL	163S
Forging Station	NO.	3	3	3	3	3	3
Forging force	tons	80	90	105	120	130	190
Max.cut-off dia.	mm	12	12	15	15	15	18
Max.cut-off length	mm	105	190	140	250	350	195
Output rate	pcs/min	180	130	150	100	70	100
P. K. O. stroke	mm	15	30	20	30	60	30
K.O stroke	mm	80	165	110	220	330	170
Main motor power	Kw	22	22	30	37	37	45
Overall dims. Of cut off die	mm	Φ45	Φ45	Φ55	Φ55	Φ55	Φ60
Overall dims. Of punch die	mm	Φ53*115L	Φ53*115L	Φ60*115L	Φ60*170L	Φ60*250L	Φ75*185L
Overall dims. Of main die	mm	Φ75*108L	Φ75*185L	Φ85*135L	Φ85*265L	Φ90*340L	Φ100*190L
Die pitch	mm	90	90	110	110	110	126
Approx. weight	T	13.8	19	18	25	36	38
Applicable bolt size	mm	6-10	6-10	8-12.7	8-12.7	8-12.7	10-16
Shank length below head	mm	15-75	30-150	20-105	50-205	100-300	20-155

Four Stations Multi Stage High Speed Bolt Making Machine
Model	Unit	44S	64S	84S	104S	104L	134L
Forging Station	NO.	4	4	4	4	4	4
Forging force	Tons	16	35	60	80	80	120
Max.cut-off dia.	mm	Φ4	φ8	φ10	φ12	φ12	φ15
Max.cut-off length	mm	66	80	115	135	185	190
Output rate	pcs/min	350	140-210	120-180	90-140	80-130	75-110
P. K. O. stroke	mm	12	12	18	20	30	40
K.O stroke	mm	52	70	92	118	160	175
Main ram stroke	mm	95	110	160	190	262	270
Main motor power	Kw	11	15	22	30	30	37
Overall dims. Of cut off die	mm	Φ20	φ30*45L	φ50*50L	φ45*59L	φ45*59L	φ63*69L
Overall dims. Of punch die	mm	Φ35*75L	φ40*90L	φ45*125L	φ53*115L	φ53*115L	φ60*130L
Overall dims. Of main die	mm	Φ40*85L	φ50*85L	φ60*130L	φ75*135L	φ75*185L	φ86*190L
Die pitch	mm	50	60	70	90	94	110
Approx. weight	T	4.3	8	14	18	21	28
Applicable bolt size	mm	1-4	3-6	5-8	6-10	6-10	8-12.7
Shank length of blank	mm	6-50	10-65	15-90	15-110	20-152	20-160

The post Three forging stations bolt making machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

Hydraulic bending machine

admin — Tue, 10 Nov 2020 08:33:33 +0000

AC67Y series hydraulic bending machine

Hydraulic upwards drive.

The slider synchronization mechanism adopts torsion shaft synchronization and mechanical stop, which is stable and reliable.

Wedge-style fine adjustment.

The stroke of the slider can be adjusted quickly and manually, and the counter is displayed.

The back gauge can be adjusted quickly and dynamically.

The control system adopts ESTUN E200 CNC system.

Parameter	Unit	AC67Y-63/2500	AC67Y-63/3200	AC67Y-100/2500	AC67Y-100/3200	AC67Y-100/4000	AC67Y-125/2500	AC67Y-125/3200	AC67Y-125/4000	AC67Y-160/2500	AC67Y-160/3200	AC67Y-160/4000	AC67Y-160/5000
Nominal force	KN	630	630	1000	1000	1000	1250	1250	1250	2500	3200	4000	5000
Workbench height	mm	2500	3200	2500	3200	4000	2500	3200	4000	2050	2600	3200	4000
Distance between columns	mm	2050	2600	2050	2600	3300	2050	2600	3200	320	320	320	320
Throat depth	mm	250	250	320	320	320	320	320	320	200	200	200	200
Slider stroke	mm	100	100	150	150	150	150	150	150	160	160	160	160
Slider stroke margin	mm	75	75	120	120	120	120	120	120	470	470	470	470
Max. open height	mm	345	345	415	415	415	415	415	415	11	11	11	11
Main motor	KW	5.5	5.5	7.5	7.5	7.5	7.5	7.5	7.5	2560	3260	4060	5100
Legnth	mm	2560	3260	3650	3350	4150	2650	3350	4150	1940	1940	1940	1940
Width	mm	1725	1725	1785	1785	1785	1785	1785	1785	2660	2660	2660	2920
Height	mm	2280	2280	2460	2510	2560	2540	2560	2610	2660	2660	2660	2920
Weight	kg	4400	5200	6100	7000	7900	6600	7300	8800	9000	9600	11800	14000

Parameter	Unit	AC67Y-160/6000	AC67Y-200/3200	AC67Y-200/4000	AC67Y-200/5000	AC67Y-200/6000	AC67Y-250/3200	AC67Y-250/4000	AC67Y-250/5000	AC67Y-250/6000	AC67Y-300/3200	AC67Y-300/4000	AC67Y-300/5000
Nominal force	KN	6000	2000	2000	2000	2000	2500	2500	2500	2500	3000	3000	3000
Workbench height	mm	4800	3200	4000	5000	6000	3200	4000	5000	6000	3200	4000	5000
Distance between columns	mm	320	2600	3200	4000	4800	2600	3200	4000	4800	2600	3200	4000
Throat depth	mm	200	320	320	320	320	400	400	400	400	480	480	480
Slider stroke	mm	160	200	200	200	200	250	250	250	250	250	250	250
Slider stroke margin	mm	470	160	160	160	160	200	200	200	200	200	200	200
Max. open height	mm	11	520	520	520	520	560	560	560	560	560	560	560
Main motor	KW	6100	15	15	15	15	18.5	18.5	18.5	18.5	22	22	22
Legnth	mm	1940	3500	4150	5150	6150	3350	4150	5150	6150	3350	4150	5150
Width	mm	3200	1940	1940	2000	2000	2000	2000	2000	2000	2100	2100	2100
Height	mm	3200	2660	2900	3100	3300	2900	2970	3180	3300	3100	3150	3420
Weight	kg	17000	12000	14800	18000	23000	16000	21000	238000	27000	18500	22000	26000

Parameter	Unit	AC67Y-300/6000	AC67Y-400/3200	AC67Y-400/4000	AC67Y-400/5000	AC67Y-400/6000	AC67Y-500/4000	AC67Y-500/5000	AC67Y-500/6000	AC67Y-500/7000	AC67Y-600/4000	AC67Y-600/6000
Nominal force	KN	3000	4000	4000	4000	4000	5000	5000	5000	5000	6000	6000
Workbench height	mm	6000	3200	4000	5000	6000	4000	5000	6000	7000	4000	6000
Distance between columns	mm	4800	2600	3200	4000	4800	3200	4000	4800	5600	3200	4800
Throat depth	mm	480	400	400	400	400	400	400	400	400	400	400
Slider stroke	mm	250	300	300	300	300	300	300	300	300	300	300
Slider stroke margin	mm	200	250	250	250	250	250	250	250	250	250	250
Max. open height	mm	560	630	630	630	630	630	630	630	630	630	630
Main motor	KW	22	30	30	30	30	37	37	37	37	45	45
Legnth	mm	6150	3300	4150	5150	6150	4150	5150	6150	7150	4150	6150
Width	mm	2100	2260	2260	2260	2260	2400	2400	2400	2400	2500	2500
Height	mm	3750	3200	3400	3600	3800	3600	3800	3900	4100	4200	4800
Weight	kg	33500	23000	29000	35000	38000	40000	57000	59000	64000	45000	68000

AE67K series CNC hydraulic bending machine

It is hydraulically upwards driven,double oil cylinders.

Electro-hydraulic servo synchronous valve group, grating ruler detection, closed-loop control slide stroke (Y1, Y2 axis).

Automatic compensation of workbench deflection.

CNC backgauge control (X axis).

CNC control system.

Standard Delem DA-52 control system, optional DA-56 or DA-65W control system.

Parameter	Unit	AE67K-63/2500	AE67K-63/3200	AE67K-100/2500	AE67K-100/3200	AE67K-100/4000	AE67K-125/2500	AE67K-125/3200	AE67K-125/4000	AE67K-160/2500
Nominal force	KN	630	630	1000	1000	1000	1250	1250	1250	1600
Workbench height	mm	2500	3200	2500	3200	4000	2500	3200	4000	2500
Distance betAEen columns	mm	2050	2700	2050	2700	3200	2050	2700	3200	2050
Throat depth	mm	300	300	350	350	350	350	350	350	350
Slider stroke	mm	160	160	200	200	200	200	200	200	200
Max. open height	mm	5.5	5.5	400	400	400	400	400	400	450
Main motor	KW	5.5	5.5	7.5	7.5	7.5	7.5	7.5	7.5	11
Legnth	mm	2750	3300	2750	3300	4150	2750	3300	4150	2750
Width	mm	1600	1600	1750	1750	1750	1750	1750	1750	1800
Height	mm	2450	2650	2600	2700	2750	2650	2750	2800	2650
AEight	kg	6000	6600	8300	9500	11000	8800	105500	12000	9600

Parameter	Unit	AE67K-160/3200	AE67K-160/4000	AE67K-160/5000	AE67K-200/2500	AE67K-200/3200	AE67K-200/4000	AE67K-200/5000	AE67K-200/6000	AE67K-250/2500
Nominal force	KN	1600	1600	1600	2000	2000	2000	2000	2000	2500
Workbench height	mm	3200	4000	5000	2500	3200	4000	5000	6000	2500
Distance betAEen columns	mm	2700	3200	4500	2050	2700	3200	4500	5100	2050
Throat depth	mm	350	350	350	400	400	400	400	400	400
Slider stroke	mm	200	200	200	250	250	250	250	250	250
Max. open height	mm	450	450	450	520	520	520	520	520	520
Main motor	KW	11	11	11	18.5	18.5	18.5	18.5	18.5	18.5
Legnth	mm	3300	4150	5150	2750	3300	4150	5150	6150	2750
Width	mm	1800	1800	1800	2000	2000	2000	2000	2000	2000
Height	mm	2750	2800	2970	2800	2910	2950	3200	3350	2850
AEight	kg	11800	13200	17400	10000	14500	16000	20000	24800	12800

Parameter	Unit	AE67K-250/3200	AE67K-250/4000	AE67K-250/5000	AE67K-250/6000	AE67K-320/3200	AE67K-320/4000	AE67K-320/5000	AE67K-320/6000	AE67K-400/3200
Nominal force	KN	2500	2500	2500	2500	3200	3200	3200	3200	4000
Workbench height	mm	3200	4000	5000	6000	3200	4000	5000	6000	3200
Distance betAEen columns	mm	2700	3200	4500	5100	2700	3200	4500	5100	2700
Throat depth	mm	400	400	400	400	400	400	400	400	400
Slider stroke	mm	250	250	250	250	250	250	250	250	300
Max. open height	mm	520	520	520	520	550	550	550	550	570
Main motor	KW	18.5	18.5	18.5	18.5	22	22	22	22	30
Legnth	mm	3300	4150	5150	6150	3350	4150	5150	6150	3470
Width	mm	2000	2000	2000	2000	2100	2100	2100	2100	3200
Height	mm	2930	2980	3200	3350	3150	3200	3420	3800	4250
AEight	kg	15000	17800	24500	29800	19600	22200	29000	33200	24000

Parameter	Unit	AE67K-400/4000	AE67K-400/5000	AE67K-400/6000	AE67K-400/7000	AE67K-500/3200	AE67K-500/4000	AE67K-500/5000	AE67K-500/6000	AE67K-500/7000
Nominal force	KN	4000	4000	4000	4000	5000	5000	5000	5000	5000
Workbench height	mm	4000	5000	6000	7000	3200	4000	5000	6000	7000
Distance betAEen columns	mm	3200	4000	5000	5600	2700	3300	4000	5000	5600
Throat depth	mm	400	400	400	400	450	450	450	450	450
Slider stroke	mm	300	300	300	300	300	300	300	300	300
Max. open height	mm	570	570	570	570	600	600	600	600	600
Main motor	KW	30	30	30	30	37	37	37	37	37
Legnth	mm	4270	5270	6270	7270	3470	4270	5270	6370	7370
Width	mm	3200	3200	3200	3200	3400	3400	3400	3400	3400
Height	mm	4370	4710	5020	5355	4670	4670	4750	5080	5450
AEight	kg	26000	32000	38000	45000	42000	46000	49000	53000	58000

Parameter	Unit	AE67K-500/8000	AE67K-600/4000	AE67K-600/5000	AE67K-600/6000	AE67K-600/7000	AE67K-700/4000	AE67K-700/5000	AE67K-700/6000	AE67K-700/7000
Nominal force	KN	5000	6000	6000	6000	6000	7000	7000	7000	7000
Workbench height	mm	8000	4000	5000	6000	7000	4000	5000	6000	7000
Distance betAEen columns	mm	6000	3300	4000	5000	5600	3300	4000	5000	5600
Throat depth	mm	450	500	500	500	500	600	600	600	600
Slider stroke	mm	300	350	350	350	350	350	350	350	350
Max. open height	mm	600	650	650	650	650	700	700	700	700
Main motor	KW	37	45	45	45	45	45	45	45	45
Legnth	mm	8370	4270	5270	6370	7380	4270	5270	6370	7370
Width	mm	3400	3800	3800	3800	3800	3000	3000	3000	3000
Height	mm	5600	5160	5340	5560	6100	5400	5650	5900	6300
AEight	kg	68000	51000	56000	63000	70000	56000	62000	69000	76000

Parameter	Unit	AE67K-800/4000	AE67K-800/5000	AE67K-800/6000	AE67K-800/7000	AE67K-800/8000	AE67K-1000/5000	AE67K-1000/6000	AE67K-1000/7000	AE67K-1000/8000
Nominal force	KN	8000	8000	8000	8000	8000	10000	10000	10000	10000
Workbench height	mm	4000	5000	6000	7000	8000	5000	6000	7000	8000
Distance betAEen columns	mm	3300	4000	5000	5600	6000	4000	5000	5600	6000
Throat depth	mm	600	600	600	600	600	800	800	800	800
Slider stroke	mm	400	400	400	400	400	400	400	400	400
Max. open height	mm	800	800	800	800	800	1000	1000	1000	1000
Main motor	KW	55	55	55	55	55	2-45	2-45	2-45	2-45
Legnth	mm	4250	5250	6370	7370	8370	5450	6450	7450	8450
Width	mm	3400	3400	3400	3400	3400	4250	4250	4250	4250
Height	mm	5960	6210	6500	6750	7000	7300	7650	7950	8300
AEight	kg	65000	74000	86000	98000	10800	115000	130000	145000	160000

Parameter	Unit	AE67K-1200/5000	AE67K-1200/6000	AE67K-1200/7000	AE67K-1200/8000	AE67K-1500/6000	AE67K-1500/7000	AE67K-1500/8000	AE67K-1650/6000	AE67K-1650/7000	AE67K-1650/8000
Nominal force	KN	12000	12000	12000	12000	15000	15000	15000	16500	16500	16500
Workbench height	mm	5000	6000	7000	8000	6000	7000	8000	6000	7000	8000
Distance betAEen columns	mm	4000	5000	5600	6200	5000	5600	6200	5000	5600	6200
Throat depth	mm	800	800	800	800	800	800	800	800	800	800
Slider stroke	mm	600	600	600	600	600	600	600	600	600	600
Max. open height	mm	1000	1000	1000	1000	1200	1200	1200	1200	1200	1200
Main motor	KW	2-45	2-45	2-45	2-45	2-55	2-55	2-55	2-55	2-55	2-55
Legnth	mm	5450	6450	7450	8450	6450	7450	8450	6450	7450	8450
Width	mm	4250	4250	4250	4250	4600	4600	4600	4800	4800	4800
Height	mm	7300	7650	7950	8300	8500	8700	8960	8500	8700	8950
AEight	kg	11500	130000	145000	160000	165000	180000	200000	170000	185000	210000

AM series hydraulic bending machine

Hydraulic pressure downwards driven, which is convenient for processing larger size box workpieces.

Long-term use of the rack still maintains high accuracy.

The middle part is pressurized to reduce the insufficient force in the middle part.

Roller-oriented, smooth movement.

The bending depth can be determined with high precision.

Slow bending function.

High-speed, high-precision backgauge.

The numerical control system adopts NC9 numerical control system.

Parameter	Unit	AM50120	AM1030
Nominal force	KN	500	1000
Workbench height	mm	1200	3000
Distance between columns	mm	1020	2550
Throat depth	mm	400	400
Slider stroke	mm	100	100
Slider stroke margin	mm	370	370
Max. open height	mm	3.7	7.5
Main motor	KW	1355	3055
Legnth	mm	1025	1560
Width	mm	1960	2300
Height	mm	2000	6400
Weight	kg	4400	5200

The post Hydraulic bending machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

Hydraulic shearing machine

admin — Tue, 10 Nov 2020 08:17:44 +0000

Hydraulic pendulum shears

The all-steel welded structure has sufficient strength and rigidity.

The backgauge device can be quickly adjusted by motor, fine-tuned manually, and digitally displayed.

Quick adjustment of the blade gap.

Counting device.

Reliable safety barrier.

Adopt ESTUN E200-S system.

The standard configuration:

CNC system E21S

Backgauge: Ball screw

Blade material: 6CrW2Si (mainly cutting Q235 sheet metal)

Parameters	Unit	AC12Y-6×2500	AC12Y-6×3200	AC12Y-8×2500	AC12Y-12×2500
Max. sheet thickness	mm	6	6	8	12
Max. sheet width	mm	2500	3200	2500	2500
Sheet metal strength	N/mm2	450	450	450	450
shear angle	deg	1.5	1.5	1.5	1.5
Backgauge max. distance	mm	600	600	600	800
Main motor	KW	7.5	7.5	11	18.5
Dimension	mm	313015301600	384016751620	320018501850	322518001940
Weight	kg	5200	6700	7000	8600

Hydraulic guillotine shears

The all-steel welded structure has sufficient strength and rigidity.

Hydraulic transmission, nitrogen return stroke.

The tool post is positioned by the rolling guide, eliminating the gap between the guides.

The cutting angle of the machine can be adjusted.

The cutting stroke can be adjusted.

The backgauge device can be quickly adjusted by motor, fine-tuned manually, and digitally displayed.

Quick adjustment of the blade gap.

Counting device.

Use Delem DAC-360 control system.

Parameters	Unit	AC11Y-8×2500	AC11Y-12×2500	AC12Y-16×2500
Max. sheet thickness	mm	8	12	16
Max. sheet width	mm	2500	2500	2500
Sheet metal strength	N/mm2	450	450	450
shear angle	deg	0.5～1.5	0.5～2	0.5～2.5
Backgauge max. distance	mm	800	800	800
Main motor	KW	11	15	22
Dimension	mm	313015501990	313016202110	315017702250
Weight	kg	6500	7500	8700

The post Hydraulic shearing machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

Bolt nut washer assembly machine

admin — Tue, 10 Nov 2020 08:11:32 +0000

• High Speed • Advance Design • Steady performance • Durable Service Life •

The post Bolt nut washer assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

Windows anchor assembly machine

admin — Tue, 10 Nov 2020 08:11:01 +0000

• High Speed • Advance Design • Steady performance • Durable Service Life •

The post Windows anchor assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

Wedge anchor assembly machine

admin — Tue, 10 Nov 2020 08:09:21 +0000

• High Speed • Advance Design • Steady performance • Durable Service Life •

The post Wedge anchor assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

FC36-3 Tri Metal Rivet and Electrical Contact Machine

admin — Wed, 07 Oct 2020 08:27:34 +0000

APPLICATION

• MICRO SWITCH MANUFACTURERS
• AUXILIARY SWITCH MANUFACTURERS
• ROTARY SWITCH MANUFACTURERS
• LIMIT SWITCH MANUFACTURERS
• KNIFE SWITCH MANUFACTURERS
• ROCKER SWITCH MANUFACTURERS
• DOMESTIC SWITCH MANUFACTURERS
• AUTOMOTIVE SWITCH MANUFACTURERS
• RELAYS MANUFACTURERS
• MOTOR STARTER
• SWITCH GEARS MANUFACTURES
• AUTOMOTIVE MANUFACTURES
• AVIATION MANUFACTURES
• APPLIANCES MANUFACTURES

The machine can produce cold headed solid and tri metal contacts from a wide variety of materials.

Typical alloys include:

Silver
Fine grained silver
Silver-Nickel
Silver-Iron
Silver-Graphite

Silver-Cadmium Oxide
Silver-Tin Oxide
Gold
Platinum
Palladium

Bi metal and Tri metal electric contact rivets type:Ag/Cu、FAg/Cu、AgNi/Cu、AgSnO2/Cu、AgSnO2In2O3/Cu、AgCu/Cu、AgZnO/Cu、AgCdO/Cu,etc bi metal composite electrical contact rivets；Ag/Cu/Ag、FAg/Cu/FAg、AgNi/Cu/AgNi、AgSnO2/Cu/AgSnO2、AgSnO2In2O3/Cu / AgSnO2In2O3、AgZnO/Cu/ AgZnO、AgCdO/Cu/AgCdO etc. tri metal composite electrical contact rivets

Main Technical Parameters

Item	Data
Motor Power	3Kw
Machine Power	3.6kw
Power Supply	380v50hz
Net Weight	1800kg
Transducer	5.5kw
Dimension(LxWxH)	1530x1020x1420mm
Head Dia	2-8
Head Thickness	Max3
Shank Dia.	φ1- φ 4
Head Silver Layer	Min 0.25
Shank Length	Max9
Shank Silver Layer	Min0.4-2.5
Output	4000-8000pcs/h

Straight Line Wire Drawing Machine LZ9/1200+Spool Take-up Machine GS 1250

The post FC36-3 Tri Metal Rivet and Electrical Contact Machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

FC828 Bi-metal Contact and Rivet Machine

admin — Wed, 07 Oct 2020 08:26:06 +0000

APPLICATION

The machine can produce cold headed solid and bimetal contacts from a wide variety of materials.

Typical alloys include:

Silver
Fine grained silver
Silver-Nickel
Silver-Iron
Silver-Graphite

Silver-Cadmium Oxide
Silver-Tin Oxide
Gold
Platinum
Palladium

Main Technical Parameters

Item	Data
Round button dia.	φ2.5mm- φ 8.5mm
Square button size	2.5×2.5-7x7mm
Thickness of button	0.5-3.2mm
Rivet head dia	φ 2.5- φ 8.5mm
Thickness of rivet head	Max 3.2mm
Dia. of rivet shank	φ 1.2- φ 4.9mm
Thickness of rivet head	Max 6mm
Silver thickness	Min0.25mm
Button output	2200-7000pcs/hr
Rivet output	2200-11000pcs/hr
Power	3.6KW,380V,50HZ
Compress air	Min0.2Mpa
Net weight	1650kg

Coil and Steel bar straightening & cutting machine

The post FC828 Bi-metal Contact and Rivet Machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

Single Coil Spring Lock Washer Making Complete Equipment/Machines

admin — Wed, 07 Oct 2020 08:10:22 +0000

Solution and production process:

1.Machine to make belt wire from round wire
2.Rolling-up machine(make coil from the processed wire )
3.Wire collection machine(collect wire)
4.Cutting machine(coil is to be cut )

Machine to make belt wire from round wire

Spring Washr Rolling up Machine

Coil Collection Machine

Spring Washer Coil Cutting Machine

Main Technical Parameters

Item	Specification	Speed rpm	Dimension(LWH) mm	Weight/kg
Belt Wire Drawing Machine	Reel dia.:550
Belt Wire Drawing Machine	Reel dia.:350
Coil machine	3-5mm(inner dia of final product)	1080	1380600950	400
	6mm(inner dia of final product)	1080	1600650950	450
	8-10mm(inner dia of final product)	720	18007501350	750
	12-16mm(inner dia of final product)	518	18007501350	1000
	18-22mm(inner dia of final product)	392	20001450900	1200
	24-30mm(inner dia of final product)	262	220010001500	1600
	Above 33mm(inner dia of final product)	150	260011001780	2000
Coil collection machine	Below 12mm(inner dia of final product)
Coil collection machine	12-22mm(inner dia of final product)
Cutting machine	3-5mm(inner dia of final product)	530	8507001250	300
	6-8mm(inner dia of final product)	368	12007501350	450
	10-12mm(inner dia of final product)	296	14508501500	600
	14-16mm(inner dia of final product)	213	15509501580	1000
	18-20mm(inner dia of final product)	150	165010001600	1300
	22-30mm(inner dia of final product)	120	185012001600	1500
	above33mm(inner dia of final product)	70	200015002800	3000
Mould(round wire to belt wire) material Cr12Movz	150mm
	200mm
	150mm mould sheet
	200mm mould sheet

30B-4S Four Die Four Blow Bolt Former

The post Single Coil Spring Lock Washer Making Complete Equipment/Machines appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.

Automatic high speed screws and washers assembling machine

admin — Wed, 07 Oct 2020 08:08:33 +0000

High quality, high efficiency, with reasonable price.

1 Body frame is made of iron plate welding
2 Spare parts is make from casting
3 Inner parts is made of bearing steel

Machines Specifications

Model	Max.Blank Dia.	Max.Blank Length	Body Motor Power	Blank Per Min.	LxWxH(cm)	Net Weight	Gross Weight
SJ-3	M1.7-M3	4-12	1HP	100-300	78X56X110	300KG	350KG
SJ-6	M3-M6	5-30	1HP	100-300	112X60X130	510KG	550KG
SJ-12	M8-M12	12-60	1HP	60-300	152X60X140	800KG	900KG

36B-4S Four Die Four Blow Bolt Former

The post Automatic high speed screws and washers assembling machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.