The post Stud bolts threaded rod double ends nuts assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1.High speed automatic assembling Stud bolts threaded rod double ends nuts assembly,include stud bolt/thead rod, sleeves,spring washer,flat washer and nut.
2.Automatic finishing work of stud bolt/thead rod,sleeve,washers,nut assembling.
3.Optional line mark painting function available.
4.Fasteners quantity can be customized as per clients requirement.
Salient Features:
1. High speed,high automation and reliable performance.
2.Adopts world famous brands electric parts and sensors.
3.Advance design which easy to handle and use.
Main Technical Parameters:
Appliable size: m6-m30
Assembling speed:20-30 pcs per min.
Air source pressure:0.5-0.8mpa
Control voltage:24v DC
Appro. weight:1000kgs
Appro. dimension:1.6*1.5*1.5m
Stud bolts threaded rod double ends nuts assembly machine |
The post Stud bolts threaded rod double ends nuts assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Four stations bolt forging machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1. The machine body, main slider, and the punch connecting rod adopt QT500~QT550 ductile iron. Taiwan invests in well-known brands and adopts the reverse casting process. Although the cost is 1~1.5 yuan/KG higher than other manufacturers, but it is the basis of a good machine. (Tensile resistance and high impact resistance. Generally, the other manufacturers use HT gray iron or low-cost ball milled cast iron.
2.The crankshaft, die box seat, punch die seat, double cam, punch connecting rod and large pin shaft are made of 38COMOAT material and nitriding treatment. The surface hardness can reach HV850~950, which has excellent stability and longevity (generally manufacturers use 42COMO High-frequency quenching treatment, although it is ok to use, it is slightly inferior in terms of resistance to seizure, deformation, abrasion, and breakage).
3. The guide plate is made of wear-resistant alloy steel with full quenching treatment, which has good anti-seize and abrasion resistance. If it is overhauled after more than ten years, it will only be flat polishing little bit then will like a new one. (Generally manufacturers use surface quenching which only the surface is hard, and the hardness drops too much after grinding, and it is difficult to use for a long time.) The cylinder-type clamp frame assembly also uses a nitriding process to maintain high stability and long life (although it is heavier than aluminum clamp frame Some but significantly longer lifespan).
4.The copper tile and copper sleeve of the whole machine are made of PBC-2 (10-1) tin phosphor bronze, which has good wear resistance. Some models with a separate clamp seat use P-20 aviation aluminum which is surface-hardened, which overcomes the shortcomings of aluminum soft and short life.
5.The spring adopts Japanese and Korean brands, the important parts of the bearing adopts NSK and IKO brands, and the screw adopts TUZ brand 12.9 grade, which has high strength.
6.The gears are all processed by high-frequency quenching first,then grinding the teeth to ensure the accuracy and low noise of the machine. At the same time, the transmission efficiency is high and the life is long.(It is also ok to use if it is not quenched and finely grinded, so the general manufacturer does not do this).
7.Pneumatic components adopt Japanese SMC and less Taiwanese Airtac brands, with fewer failures and long service life.
8.Both ends of the crankshaft of M16 and above large machine, the connecting rod Huff big copper sleeve, and the back shaft both ends copper sleeve are equipped with five copper sleeve temperature monitoring instruments as standard, which can monitor the copper sleeve at any time due to lack of oil, deformation or poor tubing. If the temperature rises above 50℃, it will alarm and stop, which can effectively prevent the expansion of the fault and prolong the life of the machine.
9.The remote monitoring function (optional) is convenient for production management and statistical work. It can monitor the startup, shutdown time, speed, number of good products, etc. at any time, and even directly shut down the machine. If there is a preheating requirement in winter, the machine can be pre-heated remotely.
10.Micro-moving machine adjusting system; in the process of adjusting the machine, there are high requirements for the center of the clamp, the center of the punch hole and the main mold hole, and the material and mold. This system can avoid the fatigue of the operator’s hand pulling the flywheel and inching the main slider over to cause clamps and molds are damaged. (The jog hand wheel and servo main motor are also optional).
11.Raw wire material feeding, drive motor make feeding easily and save time.
Four Stations Multi Stage High Speed Bolt Making Machine | |||||||
Model | Unit | 44S | 64S | 84S | 104S | 104L | 134L |
Forging Station | NO. | 4 | 4 | 4 | 4 | 4 | 4 |
Forging force | Tons | 16 | 35 | 60 | 80 | 80 | 120 |
Max.cut-off dia. | mm | Φ4 | φ8 | φ10 | φ12 | φ12 | φ15 |
Max.cut-off length | mm | 66 | 80 | 115 | 135 | 185 | 190 |
Output rate | pcs/min | 350 | 140-210 | 120-180 | 90-140 | 80-130 | 75-110 |
P. K. O. stroke | mm | 12 | 12 | 18 | 20 | 30 | 40 |
K.O stroke | mm | 52 | 70 | 92 | 118 | 160 | 175 |
Main ram stroke | mm | 95 | 110 | 160 | 190 | 262 | 270 |
Main motor power | Kw | 11 | 15 | 22 | 30 | 30 | 37 |
Overall dims. Of cut off die | mm | Φ20 | φ30*45L | φ50*50L | φ45*59L | φ45*59L | φ63*69L |
Overall dims. Of punch die | mm | Φ35*75L | φ40*90L | φ45*125L | φ53*115L | φ53*115L | φ60*130L |
Overall dims. Of main die | mm | Φ40*85L | φ50*85L | φ60*130L | φ75*135L | φ75*185L | φ86*190L |
Die pitch | mm | 50 | 60 | 70 | 90 | 94 | 110 |
Approx. weight | T | 4.3 | 8 | 14 | 18 | 21 | 28 |
Applicable bolt size | mm | 1-4 | 3-6 | 5-8 | 6-10 | 6-10 | 8-12.7 |
Shank length of blank | mm | 6-50 | 10-65 | 15-90 | 15-110 | 20-152 | 20-160 |
Model | Unit | 134LL | 134LLL | 164S | 164LL | 204L | 204LL |
Forging Station | NO. | 4 | 4 | 4 | 4 | 4 | 4 |
Forging force | Tons | 120 | 120 | 210 | 210 | 350 | 350 |
Max.cut-off dia. | mm | φ15 | φ15 | φ18 | φ18 | Φ23 | Φ23 |
Max.cut-off length | mm | 265 | 285 | 195 | 350 | 240 | 360 |
Output rate | pcs/min | 50-80 | 50-80 | 70-100 | 70-100 | 55-80 | 60 |
P. K. O. stroke | mm | 40 | 40 | 40 | 45 | 46 | 45 |
K.O stroke | mm | 225 | 280 | 178 | 330 | 220 | 330 |
Main ram stroke | mm | 380 | 380 | 260 | 346 | ||
Main motor power | Kw | 37 | 37 | 55 | 55 | 75 | 75 |
Overall dims. Of cut off die | mm | φ63*69L | φ63*69L | Φ60*90L | Φ60 | Φ75*120L | Φ75 |
Overall dims. Of punch die | mm | φ60*229L | φ60*229L | Φ75*185L | Φ75*185L | Φ90*215L | Φ90*190L |
Overall dims. Of main die | mm | φ86*305L | φ86*305L | Φ100*190L | Φ100*345L | Φ125*240L | Φ125*345L |
Die pitch | mm | 110 | 110 | 120 | 126 | 140 | 138 |
Approx. weight | T | 33 | 38 | 45 | 66 | 62 | 75 |
Applicable bolt size | mm | 8-12.7 | 8-12.7 | 10-16 | 10-16 | 12-20 | 12-20 |
Shank length of blank | mm | 40-220 | 75-262 | 20-160 | 100-300 | 25-200 | 100-300 |
Model | Unit | 254S | 254L | 304L | 364L |
Forging Station | NO. | 4 | 4 | 4 | 4 |
Forging force | Tons | 430 | 430 | 550 | 750 |
Max.cut-off dia. | mm | Φ28 | Φ29 | Φ38 | Φ42 |
Max.cut-off length | mm | 253 | 320 | 450 | 450 |
Output rate | pcs/min | 40-70 | 60 | 45 | 45 |
P. K. O. stroke | mm | 40 | 60 | 80 | 80 |
K.O stroke | mm | 205 | 290 | 400 | 400 |
Main ram stroke | mm | 330 | |||
Main motor power | Kw | 90 | 90 | 132 | 200 |
Overall dims. Of cut off die | mm | Φ80*130L | Φ90 | Φ115 | Φ145 |
Overall dims. Of punch die | mm | Φ120*270L | Φ105*232L | Φ135*240L | Φ155*265L |
Overall dims. Of main die | mm | Φ140*250L | Φ160*294L | Φ185*420L | Φ195*420L |
Die pitch | mm | 160 | 174 | 200 | 220 |
Approx. weight | T | 105 | 105 | 186 | 258 |
Applicable bolt size | mm | 14-25.4 | 16-25.4 | 20-33 | 30-38 |
Shank length of blank | mm | 35-200 | 35-250 | 80-350 | 80-350 |
1.We reserves the right to modify the above parameters, and may not be notified if there is any modification;
2.The most suitable production speed of the product depends on the shape, size and material of the product;
3.The maximum material shear diameter and the suitable product diameter listed in the table are calculated as medium carbon alloy steel, equivalent to 10.9 high strength screws.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
stainless 430 deep hole rivet cold forging machine | three stations screw bolt rivet making machine |
The post Four stations bolt forging machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Three stations bolt forging machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1.Cast iron is made of alloy cast iron with excellent tensile strength, and has been inspected by professional third party. It has excellent shock absorption performance. In the case of high-speed stamping and high-speed feeding, the body Is stableand the vibration Is small which ensures the long-term accuracy of the machine.
2.Dynamic balance system is adopted to ensure stable and accurate high-speed operation.
3.The servo motor PLC electric control system is adopted to realize the detection of oil pressure, air pressure, voltage, current and other machine operation conditions.
4.Self developed humanized operation interface, emphasizing the safety and convenience of operators.
4.The cutting system developed by our own patent can realize the quick installation of the cutter, optimize the cutting curve and ensure the smooth and stable cutting.
5.The modular clamp system developed by our own patent has the advantages of high speed and precision,convenient operation and easy maintenance. It can save the time for the operator to adjust the machine and reduce the learning time of the fresh operator.
6.The machine adopts enlarged crankshaft and connecting rod to enhance the impact resistance and reduce the elastic deformation. The machine has high hardness and excellent wear resistance with large area contact. It is not easy to occur shaft holding phenomenon. It can adapt to high-grade alloy copper sleeve and bearing bush with high load and high sliding speed(8m/s). The wear resistance and front dead center of the machine are guaranteed for a long time.
7.The machine gear adopts whole heat treatment and high precision gear teeth grinding technology to ensure long-term wear resistance and low noise.
THREE STATIONS HIGH SPEED BOLT MAKING MACHINE | |||||||
MODEL | UNIT | 43S | 63S | 63L | 83S | 83L | 83LL |
FORGING STATION | NO. | 3 | 3 | 3 | 3 | 3 | 3 |
FORGING FORCE | TONS | 16 | 35 | 35 | 60 | 60 | 65 |
MAX.CUT-OFF DIA. | MM | 4 | 8 | 8 | 10 | 10 | 10 |
MAX.CUT-OFF LENGTH | MM | 66 | 70 | 120 | 85 | 135 | 175 |
OUTPUT RATE | PCS/MIN | 350 | 270 | 150 | 220 | 160 | 120 |
P. K. O. STROKE | MM | 12 | 12 | 20 | 12 | 15 | 30 |
K.O STROKE | MM | 52 | 52 | 115 | 65 | 125 | 165 |
MAIN MOTOR POWER | KW | 11 | 11 | 11 | 15 | 22 | 22 |
OVERALL DIMS. OF CUT OFF DIE | MM | Φ20 | Φ30 | Φ30 | Φ30 | Φ30 | Φ30 |
OVERALL DIMS. OF PUNCH DIE | MM | Φ35*75L | Φ40*90L | Φ40*110L | Φ45*100L | Φ45*115L | Φ45*115L |
OVERALL DIMS. OF MAIN DIE | MM | Φ40*85L | Φ50*85L | Φ50*123L | Φ60*95L | Φ60*135L | Φ60*185L |
DIE PITCH | MM | 50 | 60 | 60 | 70 | 80 | 80 |
APPROX. WEIGHT | T | 4 | 7 | 9 | 10 | 13 | 15.5 |
APPLICABLE BOLT SIZE | MM | 1-4 | 3-6 | 3-6 | 5-8 | 5-8 | 5-8 |
SHANK LENGTH BELOW HEAD | MM | 6-50 | 10-50 | 30-100 | 12-60 | 30-110 | 30-110 |
MODEL | UNIT | 103S | 103L | 133S | 133L | 133LL | 163S | 203L |
FORGING STATION | NO. | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
FORGING FORCE | TONS | 80 | 90 | 105 | 120 | 130 | 190 | 350 |
MAX.CUT-OFF DIA. | MM | 12 | 12 | 15 | 15 | 15 | 18 | 23 |
MAX.CUT-OFF LENGTH | MM | 105 | 190 | 140 | 250 | 350 | 195 | 250 |
OUTPUT RATE | PCS/MIN | 180 | 130 | 150 | 100 | 70 | 100 | 75 |
P. K. O. STROKE | MM | 15 | 30 | 20 | 30 | 60 | 30 | 45 |
K.O STROKE | MM | 80 | 165 | 110 | 220 | 330 | 170 | 220 |
MAIN MOTOR POWER | KW | 22 | 22 | 30 | 37 | 37 | 45 | 75 |
OVERALL DIMS. OF CUT OFF DIE | MM | Φ45 | Φ45 | Φ55 | Φ55 | Φ55 | Φ60 | Φ75 |
OVERALL DIMS. OF PUNCH DIE | MM | Φ53*115L | Φ53*115L | Φ60*115L | Φ60*170L | Φ60*250L | Φ75*185L | Φ90*190L |
OVERALL DIMS. OF MAIN DIE | MM | Φ75*108L | Φ75*185L | Φ85*135L | Φ85*265L | Φ90*340L | Φ100*190L | Φ125*240L |
DIE PITCH | MM | 90 | 90 | 110 | 110 | 110 | 126 | 138 |
APPROX. WEIGHT | T | 13.8 | 19 | 18 | 25 | 36 | 38 | 58 |
APPLICABLE BOLT SIZE | MM | 6-10 | 6-10 | 8-12.7 | 8-12.7 | 8-12.7 | 10-16 | 12-20 |
SHANK LENGTH BELOW HEAD | MM | 15-75 | 30-150 | 20-105 | 50-205 | 100-300 | 20-155 | 25-200 |
1.We reserves the right to modify the above parameters, and may not be notified if there is any modification;
2.The most suitable production speed of the product depends on the shape, size and material of the product;
3.The maximum material shear diameter and the suitable product diameter listed in the table are calculated as medium carbon alloy steel, equivalent to 10.9 high strength screws.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
stainless 430 deep hole rivet cold forging machine | three stations screw bolt rivet making machine |
The post Three stations bolt forging machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Elevator sleeve anchor bolt nut sleeve washer automatic assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1.High speed automatic assembling Elevator sleeve anchor components,include bolt/screw, sleeves,spring washer,flat washer and nut.
2.Automatic finishing work of bolt,sleeve,washers,nut assembling.
3.Optional line mark painting function available.
4.Fasteners quantity can be customized as per clients requirement.
Salient Features:
1. High speed,high automation and reliable performance.
2.Adopts world famous brands electric parts and sensors.
3.Advance design which easy to handle and use.
Main Technical Parameters:
Appliable size: m6-m16
Assembling speed:35-45 pcs per min.
Air source pressure:0.5-0.8mpa
Control voltage:24v DC
Appro. weight:1100kgs
Appro. dimension:1.6*1.3*1.5m
Elevator sleeve anchor bolt nut sleeve washer automatic assembly machine running videos:
Elevator sleeve anchor bolt nut sleeve washer automatic assembly machine |
The post Elevator sleeve anchor bolt nut sleeve washer automatic assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Windows metal frame anchor automatic assemble machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1.High speed automatic assembling Windows metal frame anchor components,include bolt/screw,spring washer,flat washer and nut.
2.Automatic finishing work of bolt,sleeve,washers,nut assembling.
3.Optional line mark painting function available.
4.Fasteners quantity can be customized as per clients requirement.
Salient Features:
1. High speed,high automation and reliable performance.
2.Adopts world famous brands electric parts and sensors.
3.Advance design which easy to handle and use.
Main Technical Parameters:
Appliable size: m6-m12
Assembling speed:30-40 pcs per min.
Air source pressure:0.5-0.8mpa
Control voltage:24v DC
Appro. weight:1200kgs
Appro. dimension:1.6*1.3*1.5m
Windows metal frame anchor automatic assemble machine running videos:
Windows Metal Frame Anchor fasteners sleeve bolt nut automatic assemble machine |
The post Windows metal frame anchor automatic assemble machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Bolt screw washers nut fasten assembling machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1.High speed automatic assembling fastener components,include bolt/screw,spring washer,flat washer and nut.
2.Automatic finishing work of bolt,sleeve,washers,nut assembling.
3.Optional line mark painting function available.
4.Fasteners quantity can be customized as per clients requirement.
Salient Features:
1. High speed,high automation and reliable performance.
2.Adopts world famous brands electric parts and sensors.
3.Advance design which easy to handle and use.
Main Technical Parameters:
Appliable size: m6-m20
Assembling speed:50-60 pcs per min.
Air source pressure:0.5-0.8mpa
Control voltage:24v DC
Appro. weight:1000kgs
Appro. dimension:1.5*1.2*1.5m
Bolt screw washers nut fasten assembling machine running videos:
hex bolt nut spring flat washer automatic assembly machine | Hot dip galvanized bolt fastener assembling machine |
The post Bolt screw washers nut fasten assembling machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Sleeve anchor fasteners automatic assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1.High speed automatic assembling sleeve anchor bolt components,include bolt,sleeves,spring washer,flat washer and nut.
2.Automatic finishing work of bolt,sleeve,washers,nut assembling.
3.Optional line mark painting function available.
4.Fasteners quantity can be customized as per clients requirement.
Salient Features:
1. High speed,high automation and reliable performance.
2.Adopts world famous brands electric parts and sensors.
3.Advance design which easy to handle and use.
Main Technical Parameters:
Appliable size: m6-m20
Assembling speed:50-60 pcs per min.
Air source pressure:0.5-0.8mpa
Control voltage:24v DC
Appro. weight:1000kgs
Appro. dimension:1.5*1.2*1.5m
Sleeve anchor fasteners automatic assembly machine running videos:
Sleeve expansion anchor bolt fastener automatic assembly machine | Sleeve anchors bolt nut sleeve washer automatic assembly machine |
The post Sleeve anchor fasteners automatic assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Wedge anchor bolt clip washer nut assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>1.High speed automatic assembling wedge through anchor bolt components,include wedge anchor bolt,clip,spring washer,flat washer and nut.
2.Automatic finishing work of fasten the clip onto the wedge bolt neck.
3.Optional line mark painting function available.
Salient Features:
1. High speed,high automation and reliable performance.
2.Adopts world famous brands electric parts and sensors.
3.Advance design which easy to handle and use.
Main Technical Parameters:
Appliable size: m6-m20
Assembling speed:30-50 pcs per min.
Air source pressure:0.5-0.8mpa
Control voltage:24v DC
Appro. weight:1500kgs
Appro. dimension:1.5*1.2*1.5m
Wedge anchor assemblign machine running videos:
wedge anchor bolt clip automatic clamping assemble machine | wedge anchor bolt clip washer nut assembly machine with line marking |
The post Wedge anchor bolt clip washer nut assembly machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Three forging stations bolt making machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>14.Touch screen and man-machine dialogue numerical control system are optional for meeting customer’s requirement, they are used for setting the length of thread pipe of rear knock out, the length of barrier and the feeding length, it is convenient for quick die change. This system has a memory capacity of 99 mnemonic modules for meeting the requirement of quick die change.
Main Technical Parameters
Three Stations High Speed Bolt Making Machine | |||||||
Model | Unit | 43S | 63S | 63L | 83S | 83L | 83LL |
Forging Station | NO. | 3 | 3 | 3 | 3 | 3 | 3 |
Forging force | tons | 16 | 35 | 35 | 60 | 60 | 65 |
Max.cut-off dia. | mm | 4 | 8 | 8 | 10 | 10 | 10 |
Max.cut-off length | mm | 66 | 70 | 120 | 85 | 135 | 175 |
Output rate | pcs/min | 350 | 270 | 150 | 220 | 160 | 120 |
P. K. O. stroke | mm | 12 | 12 | 20 | 12 | 15 | 30 |
K.O stroke | mm | 52 | 52 | 115 | 65 | 125 | 165 |
Main motor power | Kw | 11 | 11 | 11 | 15 | 22 | 22 |
Overall dims. Of cut off die | mm | φ20 | φ30 | φ30 | φ30 | φ30 | φ30 |
Overall dims. Of punch die | mm | φ35*75L | φ40*90L | φ40*110L | φ45*100L | φ45*115L | φ45*115L |
Overall dims. Of main die | mm | φ40*85L | φ50*85L | φ50*123L | φ60*95L | φ60*135L | φ60*185L |
Die pitch | mm | 50 | 60 | 60 | 70 | 80 | 80 |
Approx. weight | T | 4 | 7 | 9 | 10 | 13 | 15.5 |
Applicable bolt size | mm | 1-4 | 3-6 | 3-6 | 5-8 | 5-8 | 5-8 |
Shank length below head | mm | 6-50 | 10-50 | 30-100 | 12-60 | 30-110 | 30-110 |
Model | Unit | 103S | 103L | 133S | 133L | 133LL | 163S |
Forging Station | NO. | 3 | 3 | 3 | 3 | 3 | 3 |
Forging force | tons | 80 | 90 | 105 | 120 | 130 | 190 |
Max.cut-off dia. | mm | 12 | 12 | 15 | 15 | 15 | 18 |
Max.cut-off length | mm | 105 | 190 | 140 | 250 | 350 | 195 |
Output rate | pcs/min | 180 | 130 | 150 | 100 | 70 | 100 |
P. K. O. stroke | mm | 15 | 30 | 20 | 30 | 60 | 30 |
K.O stroke | mm | 80 | 165 | 110 | 220 | 330 | 170 |
Main motor power | Kw | 22 | 22 | 30 | 37 | 37 | 45 |
Overall dims. Of cut off die | mm | Φ45 | Φ45 | Φ55 | Φ55 | Φ55 | Φ60 |
Overall dims. Of punch die | mm | Φ53*115L | Φ53*115L | Φ60*115L | Φ60*170L | Φ60*250L | Φ75*185L |
Overall dims. Of main die | mm | Φ75*108L | Φ75*185L | Φ85*135L | Φ85*265L | Φ90*340L | Φ100*190L |
Die pitch | mm | 90 | 90 | 110 | 110 | 110 | 126 |
Approx. weight | T | 13.8 | 19 | 18 | 25 | 36 | 38 |
Applicable bolt size | mm | 6-10 | 6-10 | 8-12.7 | 8-12.7 | 8-12.7 | 10-16 |
Shank length below head | mm | 15-75 | 30-150 | 20-105 | 50-205 | 100-300 | 20-155 |
Four Stations Multi Stage High Speed Bolt Making Machine | |||||||
Model | Unit | 44S | 64S | 84S | 104S | 104L | 134L |
Forging Station | NO. | 4 | 4 | 4 | 4 | 4 | 4 |
Forging force | Tons | 16 | 35 | 60 | 80 | 80 | 120 |
Max.cut-off dia. | mm | Φ4 | φ8 | φ10 | φ12 | φ12 | φ15 |
Max.cut-off length | mm | 66 | 80 | 115 | 135 | 185 | 190 |
Output rate | pcs/min | 350 | 140-210 | 120-180 | 90-140 | 80-130 | 75-110 |
P. K. O. stroke | mm | 12 | 12 | 18 | 20 | 30 | 40 |
K.O stroke | mm | 52 | 70 | 92 | 118 | 160 | 175 |
Main ram stroke | mm | 95 | 110 | 160 | 190 | 262 | 270 |
Main motor power | Kw | 11 | 15 | 22 | 30 | 30 | 37 |
Overall dims. Of cut off die | mm | Φ20 | φ30*45L | φ50*50L | φ45*59L | φ45*59L | φ63*69L |
Overall dims. Of punch die | mm | Φ35*75L | φ40*90L | φ45*125L | φ53*115L | φ53*115L | φ60*130L |
Overall dims. Of main die | mm | Φ40*85L | φ50*85L | φ60*130L | φ75*135L | φ75*185L | φ86*190L |
Die pitch | mm | 50 | 60 | 70 | 90 | 94 | 110 |
Approx. weight | T | 4.3 | 8 | 14 | 18 | 21 | 28 |
Applicable bolt size | mm | 1-4 | 3-6 | 5-8 | 6-10 | 6-10 | 8-12.7 |
Shank length of blank | mm | 6-50 | 10-65 | 15-90 | 15-110 | 20-152 | 20-160 |
The post Three forging stations bolt making machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>The post Wire Bending Machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>Hydraulic CNC Wire Bending Machine have functions of forming different 2d and 3d shapes on steel wire or stripe.
Metal wire bending machines are mainly used in auto parts industry, concrete construction industry,metal products industry, home hardware industry, such as car seat frame, cage accessories; kitchen and bathroom hardware accessories; garden tool accessories; concrete wire parts,Electrical fittings wire forming, sports equipment fittings wire forming; stationery fittings wireforming, instrument fittings wire forming, instrument fittings wire forming; hair accessories wire forming, handicrafts wire forming, supermarket shelf fittings wire forming, logistics storage accessories wire forming, etc.
Hydraulic CNC Wire Bending Machine is mainly suitable for wire bending parts from various industries such as hardware, construction, metal wire (sheet) molding, toys, stationery, clothing, lighting, jewelry, electronics and so on. The Hydraulic CNC Wire Bending Machine include: hydraulic buckle bending machine, step-feeding buckle bending machine, PLC control buckle bending machine, luggage buckle bending machine, stationery clip buckle bending machine, headset steel belt bending machine, bucket hook bending machine, crimping machine, double wire heading machine, reeling machine, wire ring bending machine, straightening and cutting machine, hydraulic ring bending machine and other various types of hardware wire (sheet/strip) bending machinery.
Material | Stainless steel,spring steel,low carbon steel |
Steel wire diameter | 1-12mm for stainless steel,2-10mm for low carbon steel
2-50mm width cs or ss sheet strip |
Capacity | 10-100pcs per minute as per customer’s product |
Power | 1.5-11KW |
Voltage | 380V/50Hz 3p or customized |
Control mode | Mechanical control, touch screen control, PLC control,etc. |
Bead headed head wire pins wire forming machine | Single coil wire spring ring forming machine |
Wire strapping packaging buckle automatic wire bending machine |
Belt hook buckle wire banding welding machine |
Wire forming machine with terminal winding function | Buckle clip with spring coil rolling wire forming machine |
Welded rectangular shape wire square frame part wire forming machine with welding | M shape strip formed fold clip buckle making machine |
Steel part wire bending machine with groove/slot forming | Slingshot handle shape part wire bending machine |
Round wire formed circle ring part wire forming machine with butt welding | Clothes hanging peg hook wire forming machine with end heading |
8 shape Gourd shape handle hook making machine | sheet metal strip open ring bent forming machine |
Steel belt strip bending forming machine | Paint bucket handle assembling steel wire forming machine |
Square wire stating length straightener and cutting machine | Trapezoid shape wire parts frame wire bending machine |
Square shape concrete embedded parts wire bending machine | flat strip wire oval shape ring strip wire bending machine |
R Clip R Pins Shaft Retaining Clips Stainless Steel Hair Spring Cotter Pin forming machine | twisted spring clip wire parts bending machine |
steel ellipse semicircle half round wire forming drawing machine | double end hang hook steel wire former |
Circle round clips ring wire forming machine | eye J garment webbing tie rail hook wire bending machine |
Binder clip fold back clip wire banding machine | Wave form steel wire clip buckle bending machine |
Hang hook automatic wire bending machine | Thick diameter steel wire hardware parts forming machine |
M shape stainless steel wire parts forming machine | U shape stainless steel wire hook parts forming machine |
& | |
R clip pin wire bending machine | D shape clips ring wire bending machine |
Oval shape clips ring auto wire bending machine | Buckle hydraulic wire bending machine with pipe part assembly |
Gourd buckle toy part wire bending machine | Kitchen hardware steel wire bending machine |
hardware tool bracket support leg wire bending machine | Ground Staple Pins tacks wire bending machine |
Barbecue grill accessories parts wire bending machine | Household trash can handle wire bending machine |
Plug clamp pin wire bending machine | sheet metal bush short pipe strip forming machine |
The post Wire Bending Machine appeared first on Ningbo Anchors Precision Machinery Co.,Ltd-Cold forging machine|Metal stamping machine|Progressive stamping die.
]]>